Board logo

MT75 Clutch release bearing
mgmiller - 16/5/08 at 07:59 PM

Does anyone know where I can purchase a clutch release bearing for a MT75 gearbox at a reasonable price? I don’t need the whole clutch kit just the bearing. I have seen one on the Burton Power website but its an extortionate price.

r1_pete - 16/5/08 at 08:03 PM

Ford dealer or local factor, still quite a common part, seem to remember mine was less than £10

Chippy - 16/5/08 at 10:24 PM

r1 pete, that must be the bargain of all time, got mine from Fords and it was £32, sure your not talking about one for a type9. Cheers Ray

Dusty - 16/5/08 at 11:53 PM

Download the Quinton Hazel clutch catalogue. Look up sierras that used MT75 and order from a QH specialist. I think it's CCT345. No idea how much it will be.

r1_pete - 17/5/08 at 08:59 AM

Sure Chippy, we are talking the cable clutch, not the Scorpio hydraulic set up aren't we?

Chippy - 17/5/08 at 02:49 PM

quote:

Sure Chippy, we are talking the cable clutch, not the Scorpio hydraulic set up aren't we?


Hi mate, yes mine is the cable operated one, though it is the 2.9i flywheel and clutch. But as I understand it the release bearing is the same for all MT75's, (or so I'm told). Cheers Ray