
Hi All,
Once again need your help and ideas.
I have my V8 up and running but the radiator just isn't up to the job (left over from it's 2 litre days!).
Can anyone suggest a suitable radiator and fans from a donor that will suit .
Sierra Cosworth rad is favourite but they are getting scarce.
Something similar size to the Sierra one would be great.
Any ideas????????????????
Cheers
What about a Land Rover 110, with the 200Tdi Engine. Its a large rad, but fairly compact, and thick.
Its not very wide, as it has the Intercooler sit beside it.
Dont know if that would do the job.
either that or get one specially made.

Triumph TR7 Radiator, or the TR8 they were probably the same rad on them both and had the 3.5V8 engine in.
No idea on the size or shape i'm afraid, just that they ran that engine and were a sports car, TVR's had the V8 as well so there probably
quite small or good Rads
MGB GT V8, I have one if you want the dims....
Thanks for all the replies!
quote:
Originally posted by r1_pete
MGB GT V8, I have one if you want the dims....
hi bigd iam all so at the rad stage i put a post on last week in the luego section off the fourm if you hut back you shold find it i got some good
advice and some size specs http://www.locostbuilders.co.uk/viewthread.php?tid=91769
[Edited on 1/7/08 by repper]
Hi Repper,
Thanks for the link.
Is a Polo rad big enough to cool a V8???
Anyone else fitted a Polo rad to a V8?
Any problems?
Thanks again.
quote:
Originally posted by BigDawgV8
Hi All,
Once again need your help and ideas.
I have my V8 up and running but the radiator just isn't up to the job (left over from it's 2 litre days!).
Can anyone suggest a suitable radiator and fans from a donor that will suit .
Sierra Cosworth rad is favourite but they are getting scarce.
Something similar size to the Sierra one would be great.
Any ideas????????????????
Cheers![]()
Although it's a good thing to have plenty of water capacity with a bigger or more poweful engine, what really matters is how much heat it can
dispose of, and that depends on thermal efficiency and airflow rather than size.
I would be inclined to use whatever fits, especially if it's from a modern car, and make sure you've got good airflow
John
quote:
Originally posted by BigDawgV8 Is a Polo rad big enough to cool a V8???
Anyone else fitted a Polo rad to a V8?
Any problems?