hi there,

does anyone have to hand or off the top off their heads know the size of pinto heads bolts.. size/thread/length

thanks


Tak

M12 x 1.75 x 92.5

Just happen to have a set handy as I have had some head work done recently

Rich

just measured one. m12 (1.75 pitch)*95mm.

M12 x 1.75 x 92.5

Just happen to have a set handy as I have had some head work done recently

Rich

just measured one. m12 (1.75 pitch)*95mm.

thanks for the replies.

didnt think it was an m12! hehe! thanks for the info guys,

much appreciated.

just out of interest, why do you want to know ?

(btw - I'll probably have a spare set or two of bothe the early and late types)

just curious , getting some new HT bolts before I take the old head off, so I've got everything I need to change it over ready.

Just had the head back from Coltec and they reccomended using HT (12.9) socket head bolts over standard head bolts, to give it a bit more pinch..

[Edited on 30-7-08 by takumi]

Some pinto's require stretch bolts, I cannot remember which though - sorry