I have a set of 4 GSXR 650 Mikunies fitted to my Pinto.
I am getting to the point of booking a rolling road session but want to do as much pre setting up as possible so as to maximise the benifit on the day.

I have loads of info on Webers and SU's but not even diagram of what is where on the Mikunies, anyone got a schematic or a link that will give me a clue where things are?

Its dead easy to set up bike carbs with the right gear. (rolling road & EGA)

Only air screw, needle height and main jet size so as long as it runs reasonably well I wouldn't be worried.

If they are balanced properly, which is the easiest thing to do at home, that will help minimize the time to get them right.

Good luck!
Steve

pic 1

R1 carbs mut may be of help.

If not say and I will pull the pics due to size.

I tried to make them smalller but you couldnt see much


cheers

Thanks Wassa, have you got the key to the numbers?

pic2

Was given a link to this site some time ago, not sure if its anymore help.

http://www.mikuni.com/fs-tuning_guide.html