1000 plus hp Duatec

Not logged in [Login - Register]

LocostBuilders » Forum » Engine & Transmission » 1000 plus hp Duatec

MIG Welders & ARC Welders at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

mangogrooveworkshop

Contributor

Posts 8643
Registered 3/12/03
Location Planet Mango
Member Is Offline

Photo Archive Go!

Building: a fun new life full of adventures

posted on 28/2/04 at 02:25 PM

1000 plus hp Duatec

Found this on a forum for DURATEC

http://www.duratecperformance.co.uk/forums/showflat.php?Cat=&Board=duranews&Number=1

Re: A Duratec I4 1000HP ! the skys the limit [re: Duratec]
18/02/04 08:03 AM Edit Reply

we are currently producing a little over 1000 hp. We had problems keeping the head on the block during the season and were not able to go over 25 pounds reliably. During the off season we made some serious space shuttle style head studs along with a copper head gasket and stainless stell oring with receiver groove. we were invited to run at the Winternationals here in Pomona so we shall see if the upgrades worked. With our calculations if we can push 38 pounds of boost this weekend we should be pushing close to 1150hp to 1200 hp this is of course to the flywheel. We shall see. If anyone is interested in producing some Madd power with these motors Bergenholtz racing can do it. my email address is teambergenholtz@aol.com

Our press release on running this weekend is here

http://www.nhraimport.com/

1000-1200hp Turbo Duratec motors

Post Extras:

LocostBuilders » Forum » Engine & Transmission » 1000 plus hp Duatec

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.