Toprivetguns
|
| posted on 2/2/10 at 09:29 PM |
|
|
ZX10 ECU bypassing (hot wiring)... ?
Hi guys,
The ZX10 manual is now my bible. When I got the engine, loom etc it didnt come with the ignition barrell, keys, etc. I know you have to somehow
bypass the Immobilsier and so forth. Im wondering who has any insight into this for or who can help?
Regards
Andy
Only drive as fast as your angel can fly... !
|
|
|
|
|
Andy W
|
| posted on 2/2/10 at 09:39 PM |
|
|
I'm using American loom and ECU, then you only need a 100ohm resistor. Not sure on the uk version, I think it may be a problem without keys, you
may need the ECU modified.
Andy
|
|
|
Davg
|
| posted on 2/2/10 at 09:44 PM |
|
|
Malc posted recently that he had got round this & could re do ecu for a fee.
|
|
|
yorkshire-engines
|
| posted on 2/2/10 at 09:54 PM |
|
|
What year is the motor and part number on ecu ? if this motor is one of mine its already been done do you have a grey wire in the ignition
wiring block ?
cheers malc
|
|
|
Toprivetguns
|
| posted on 3/2/10 at 06:19 PM |
|
|
Yes it is Malc, its a 2005 ZX10R engine. Ill check the ecu and Part number. Will get back to you ASAP. Cheers chap
Only drive as fast as your angel can fly... !
|
|
|
