scoobyis2cool
|
| posted on 16/5/04 at 01:01 PM |
|
|
Can I use fuel hose instead of radiator hose?
I need some 8mm ID hose to go from my thermostat to my expansion tank but the smallest radiator hose I've been able to find is 12.7mm. Would it
be ok to use flexible fuel hose instead?
Cheers,
Pete
It's not that I'm lazy, it's that I just don't care...
|
|
|
|
|
Mark Allanson
|
| posted on 16/5/04 at 08:47 PM |
|
|
Can't see any reason why not, probably exceeds all the temp/pressure issues by a factor of 10
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
NS Dev
|
| posted on 16/5/04 at 08:50 PM |
|
|
I've used it with no probelms for the very same thing!
|
|
|
crbrlfrost
|
| posted on 16/5/04 at 09:03 PM |
|
|
I'd suspect thats a reasonable assumption, but just for giggles you might check the websites of the suppliers, like Gates rubber, they should
have acceptable temp ranges.
|
|
|
Danozeman
|
| posted on 17/5/04 at 09:58 PM |
|
|
Will be fine mate. Thats what im running on my calibra.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
