albertz
|
| posted on 29/7/04 at 06:40 PM |
|
|
Stainless Steel Exhausts
Can anyone recommend a suitable supplier of pre-formed stainless steel bends and various other parts to allow me to make up a custom exhaust?
Due to my location, it is near impossible (not to mention impractical) to get my part finished car to a place that can make up a custom exhaust. I
don't want to have to pay 300-400 quid for the exhaust ready made.
Surely there must be an alternative............
I would prefer to keep to stainless, as the exhaust is so visible on a Locost, i don't really want a rusty MS one.
What has everyone else done? Please give me some help.
|
|
|
|
|
ChrisJLW
|
| posted on 29/7/04 at 07:54 PM |
|
|
http://jetex.co.uk/Jetexwebsite/index2.html
These guys might be able to help.
I've lived a life that's full.
I've traveled each and ev'ry highway.
But more, much more than this,
I did it side-ah-ways.
|
|
|
JohnN
|
| posted on 29/7/04 at 08:14 PM |
|
|
I have heard of this company, but have no experience of them
Milner OffRoad
|
|
|
TPG
|
| posted on 29/7/04 at 11:05 PM |
|
|
stainless bends
Get in touch with your local steel supplier.Ask for "Dairy" 'bends.They come in 304 and 316.Or RS have them.RS are exspensive
though.2" bend (265-4126) is 9.68 +vat(rswww.com)
..Which was nice..
|
|
|
jack trolley
|
| posted on 30/7/04 at 12:46 AM |
|
|
Burns Stainless in the USA: here
Have the smelling salts ready when you see the prices. 
Their catalogue is on-line at Amazon.com:
here
|
|
|
kingr
|
| posted on 30/7/04 at 09:54 AM |
|
|
That burns stainless is a pretty good place (not many places stock 321, fewer still inconel and titanium).
Rather closer to your requirements though, try Hygenic Process Equipment www.hpe.co.uk - I bought all my bends and straight SS from them, and the
price was very good (see my photo archive for the finished product).
Kingr
|
|
|
Dale
|
| posted on 30/7/04 at 01:11 PM |
|
|
What are you guys welding the stainless with if your going to have a pollished finished product?
Dale
|
|
|
lugo35
|
| posted on 31/7/04 at 05:50 PM |
|
|
stainless
hiya johnN mentioned millner offroad,havent delt with them myself but when i was on the offroad curciut everybody spoke highly of them,they
manucacture some very good bits of kit
andy
|
|
|
