Daddylonglegs
|
posted on 10/8/11 at 07:29 PM |
|
|
Which Exhaust?
OK, after a recent thread about my exhaust which is no way going to pass the IVA, I've decided I need to replace it.
I am running an old-school 2.0 Pinto (2.0 block not the 205 block) and at the moment have a 4-2 standard cast manifold with a 2 parallel pipe into
single box exhaust. I have been searching around and found these:
eBay - The UK's Online Marketplace
and
Sportex Capri 4 branch exhaust manifold 2.0 OHC Pinto | eBay
Not sure if the second one is suitable and also don't fancy buying the kit version only to bodge it up .
My other option is to keep the manifold I have, cut the 2 pipes fairly near to the joint on the manifold and make a 'Y'-piece to take a
single pipe/exhuast.
The other thing is where can I get a suitable exhuast can?
I really don't have a lot of spare cash to throw around so am looking for a cheap but do-able solution.
I would be really grateful for your thoughts guys & gals
It looks like the Midget is winning at the moment......
|
|
|
Dusty
|
posted on 10/8/11 at 08:15 PM |
|
|
The standard cast manifold is quieter than a steel or stainless one so keep it. Y piece and a can of at least 6 preferably 7" diameter and as
long as possible. MK, Martin Keenan, Wunoff, CBS can all supply.
|
|
joni
|
posted on 10/8/11 at 09:08 PM |
|
|
exhaust manifold pinto
hi have a manifold for sale send me your email addy and i can send you a pic of it regards jonny
|
|