mad4x4
|
| posted on 16/8/04 at 05:42 PM |
|
|
chv EXHAUST
OK Someone out there must be using the 1.6CVH (XR2 engine)
Any suggestions on exhausts and manifolds for MK INDY
I'd like a nice 4->1 manifold and stainless system. for under £300
Possible - Relistic?
Who do I speak to - Where can I buy?
Can I buy over the Phone or do I need to take the car to them (PS i'm in scotland and don't fancy a 800+ mile round trip to mid england in
my tow vehicle Landrover E Reg).
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
|
|
Surrey Dave
|
| posted on 16/8/04 at 06:11 PM |
|
|
Locost Lashup
Mines got a 'Locost' lashup, but you might get one from Westfield they fitted CVH engines, also Sylva fitted CVH engines in the
Stryker................................I doubt if you'll get it for under £300 squid though........
|
|
|
tom_loughlin
|
| posted on 16/8/04 at 08:04 PM |
|
|
i was thinking of buying a unassembled manifold kit - and fabricating a bracket thing for my 1800 cvh engine, then when i upgrade it, i can hack the
bracket off, and weld a different one to suit new engine.
a kit is £50 from lolocost
tom
|
|
|
nick205
|
| posted on 16/8/04 at 08:51 PM |
|
|
Have you spoken to MK?
They may have already made one for someone else or be able to use your existing manifold as a pattern.
Martin is pretty hot on tube bending and the Pinto 4 branch manifold they make looks excellent.
HTH
Nick
|
|
|
mad4x4
|
| posted on 19/8/04 at 10:39 AM |
|
|
Would they post it though.... I just did the 800mile round trip last week for side panels. DOH.
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
