andywilson
|
| posted on 4/3/12 at 10:04 PM |
|
|
fireblade carb CAD drawing
hi all
i'm supercharging my pinto and i'm currently on with fabricating the intake plenum, i'm away from the car at the moment and would
like to send a CAD drawing to my laser cutting man so i can have a basplate waiting for me when i get home (away with work at the moment).
the carbs are off a fireblade on a bogg bros manifold.
(borrowed the image so ignore the arrow)
this is where i intend to bolt the baseplate to
so if anyone has a CAD drawing of the baseplate i would need (i.e 4 X 42mm holes and the 4 bolt holes arounf each intake) i would be very grateful!
thanks, andy
[Edited on 4/3/12 by andywilson]
|
|
|
|
|
PSpirine
|
| posted on 4/3/12 at 10:16 PM |
|
|
I could knock up a DXF file if nobody has one, but you'll need to give me the dimensions (in the absence of a car, use the photograph with a
ruler...)
|
|
|
