myke pocock
|
| posted on 22/4/12 at 05:51 PM |
|
|
DGAV on x Flow
Is it safe to block the fuel return outlet on a DGAV carb or would I be advised to run a return pipe all the way back to my tank? If I do need to
could I just feed it into the filler neck above the tank or would that cause back pressure in the return pipe as the fuel would have to effectively go
'up hill'. Not that it makes any difference I suppose but the carb is fitted to a 1300 x flow.
|
|
|
|
|
Marcus
|
| posted on 22/4/12 at 06:08 PM |
|
|
I can't see it as a problem, I've seen loads with the return blocked. I ran a return line, but only because I intended to go injection at
some point.
Marcus
Because kits are for girls!!
|
|
|
D Beddows
|
| posted on 22/4/12 at 07:59 PM |
|
|
Block it off - doesn't cause a problem
|
|
|
rusty nuts
|
| posted on 22/4/12 at 08:05 PM |
|
|
Mine was fine blocked off
|
|
|
myke pocock
|
| posted on 22/4/12 at 08:44 PM |
|
|
Thanks all. One thing less to worry about then. What a help Forums can be these days!!!
|
|
|
.jpg)
