big-vee-twin
|
| posted on 23/4/12 at 06:18 PM |
|
|
Oil Leak Type 9
I have recently put oil in and got the engine running, but I have now spotted a small leak from the mechanical speedo connection.
I replaced the oil seal when cleaning up the T9.
As I am going to use an electronic sensor do I need to blank off the little gear wheel.
Suggestions for fixing the leak please
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
|
|
HowardB
|
| posted on 23/4/12 at 08:04 PM |
|
|
mine is just blanked off, as like you I have an electronic sensor. Neat aluminium plug,...
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
|
perksy
|
| posted on 23/4/12 at 08:56 PM |
|
|
I just span a piece of ally bar on the lathe and made it a nice fit
(Added a little bit of silicon to finish)
|
|
|
