avagolen
|
| posted on 1/5/12 at 05:44 PM |
|
|
Crank Sensor Wiring - Zetec
Ok Guys - (and Girls)
I have read on here that sometimes the engine will not start due to the sensor being wired wrong.
Just starting to wire up the EDIS, so how do I ensure it is correct?
Thanks in advance,
Len.
The Answer for everything, but never the last word....
|
|
|
|
|
blakep82
|
| posted on 1/5/12 at 05:49 PM |
|
|
try it, if it doesn't work, swap the two wires over. i did mine with temp wiring (no shielded cable) and one of those plastic terminal blocks.
wired, didn't work, swapped the wires over in the block, tried again, it worked. once you know what way it should be, go ahead and wire it up
properly 
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
avagolen
|
| posted on 1/5/12 at 08:41 PM |
|
|
Thanks,
I was hoping to 'get it right first time'.
Len.
The Answer for everything, but never the last word....
|
|
|
davidimurray
|
| posted on 1/5/12 at 08:58 PM |
|
|
Any help?
http://www.locostbuilders.co.uk/viewthread.php?tid=112060
Gallery 1 http://www.facebook.com/media/set/?set=a.116893465324.130778.601005324
Gallery 2 http://www.facebook.com/media/set/?set=a.245243755324.181913.601005324&l=a9831a9319
Gallery 3 http://www.facebook.com/media/set/?set=a.440671625324.232627.601005324&l=3f0d42c523
Gallery 4 http://www.facebook.com/media/set/?set=a.490098255324.297598.601005324&l=efb083b7df
Gallery 5 http://www.facebook.com/media/set/?set=a.10150244028550325.366987.601005324&l=583fd5cd3a
Gallery 6 http://www.facebook.com/media/set/?set=a.10150550640070325.430417.601005324&type=3&l=fe779b358c
Duratec Engine Swap https://www.facebook.com/media/set/?set=a.10152527759580325.1073741828.601005324&type=1&l=40aae5e72f " target="_blank"> https://www.facebook.com/media/set/?set=a.10152527759580325.1073741828.601005324&type=1&l=40aae5e72f
|
|
|
avagolen
|
| posted on 1/5/12 at 09:10 PM |
|
|
Thanks David,
I did see that thread in the early days, but not it's completion.
FlakMonkeys drawing was excellent - should be OK now.
Len.
The Answer for everything, but never the last word....
|
|
|
