Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: r1 carbs help
loughlin1

posted on 11/5/12 at 08:09 AM Reply With Quote
r1 carbs help

Help please on this
Put fuel in to test pump and pump is fine ,but after a few turns on the key noticed fuel coming out of the air inlets on all four inlets can you help on this ,fuel pipe is connected ok but the carbs have been sitting for a while

View User's Profile View All Posts By User U2U Member
loughlin1

posted on 11/5/12 at 10:03 AM Reply With Quote
sorry folks think i have it sorted
View User's Profile View All Posts By User U2U Member
Alfa145

posted on 11/5/12 at 10:05 AM Reply With Quote
What pressure is your fuel pump working at? Do you have a fuel pressure regulator fitted?

My guess is you're running a car pump and too much pressure is causing it to overflow?

View User's Profile View All Posts By User U2U Member
loughlin1

posted on 11/5/12 at 10:31 AM Reply With Quote
running r1 pump but i just looked and see where the MAIN fuel pipe comes in to the FITTING on the carb ,from the FITTING on the carb ,it branches to the left and to the right hand side of the carbs and what is missing is YES YOUR CORRECT a jubliee clip on each end of the branch into the carbs boy am i stupid or what
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.