mcerd1
|
| posted on 23/11/12 at 02:13 PM |
|
|
bike carb's direct(ish) to head ?
I'm just thinking about future upgrades (nothing else to do and I'm stuck here  )
I've got a set of ZX9R E carb's on a nice bogg bros manifold but as nice as the manifold is there is a bit of a 'step' where
the rubbers join it on
so I was wondering about using the bike's std. rubbers as the ZX9R E ones look quite neat:
and I think quite a few other bikes have similar head to carb rubbers
I'd don't think it would make a big enough gain to be worth it on my current head, but if I port it or swap for a cossie head.....
obviously I'd need to make a different manifold, probably just an adapter plate really
also I might have to re-space the carbs
what do you lot recon ?
[Edited on 23/11/2012 by mcerd1]
-
|
|
|
|
|
ChrisL
|
| posted on 23/11/12 at 09:25 PM |
|
|
Is the spacing between the carbs that same as the head?
|
|
|
mcerd1
|
| posted on 25/11/12 at 02:37 PM |
|
|
no
[Edited on 25/11/2012 by mcerd1]
-
|
|
|
