James
|
| posted on 24/9/04 at 05:27 PM |
|
|
Pinto water pump pulley- loctite the bolts?
As above really. Just putting it all together (again!) and there are no spring washers or anything so wondered if they should be Loctited in place?
Thanks,
James
|
|
|
|
|
rusty nuts
|
| posted on 24/9/04 at 05:41 PM |
|
|
I've never used Locktite on water pump pulley bolts, Most apart from the old A series {Mini etc} don't use spring washers . If in doubt
use a torque wrench set to the correct setting . Shouldn't have any problems. Rusty
|
|
|
.jpg)
