ludsonline
|
| posted on 3/4/13 at 06:04 PM |
|
|
Modified Type 9
Hi,
Has anybody modified a 2.8 Type 9 to a standard Type 9?..
Cheers
Paul
|
|
|
|
|
cliftyhanger
|
| posted on 3/4/13 at 06:17 PM |
|
|
As in machined the first motion shaft?? I had a chap do mine. The shaft obviously needs to come out of the box first.....
However, I believe it is possible todo it with a grinder. Not as neat as a lathe of course
|
|
|
mookaloid
|
| posted on 3/4/13 at 06:20 PM |
|
|
I've modified one using a spacer between the bellhousing and box from Caterham - works really well and it means that you don't have to
cowboy the input shaft
"That thing you're thinking - it wont be that."
|
|
|
ludsonline
|
| posted on 3/4/13 at 06:50 PM |
|
|
I've got access to a lathe at work & got all the dimensions. Would be cheaper to the mod than the spacer job ...
|
|
|
snapper
|
| posted on 3/4/13 at 07:28 PM |
|
|
Moves the engine and bell housing about 25mm forward but a basic, easy job
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
