Hopley89
|
| posted on 3/6/13 at 07:32 PM |
|
|
plumming set up
hi all im just sorting my plumming out on my b3 zx9r
but im a little fuzzy iv got a saxo radiator with
big pipe at bottom left
big pipe at upper right
and small pipe bottom right
im not sure were all the pipe have got to go from rad to engine .. i might use the original bike resverve tank if i can or iv got a escort header tank
...
im going to go and get all the pipes tomorrow im just wondering what to get ?
hope some one can help
dan
|
|
|
|
|
dave_424
|
| posted on 3/6/13 at 08:07 PM |
|
|
Not sure what the oil cooling on the B model ZX9 is, but on my C there is a water cooled oil cooler, bottom left down to the water pump inlet, top
right return from the back of the block, bottom right return from the oil cooler.
Dave
|
|
|
Hopley89
|
| posted on 3/6/13 at 08:12 PM |
|
|
hi mate yea theres a water cooled oil cooler on the b3 its got a hot water outlet on it .. it has already got the cold flow pipe on there
were dose the header/reserve tank fit in there ?
thanks dan
|
|
|
