Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Registering engine change with DVLA
johnH20

posted on 5/1/14 at 09:58 AM Reply With Quote
Registering engine change with DVLA

I seem to remember reading a year or so ago that new requirements for registering engine changes had come into force. As I recall it a receipt with engine number and some kind of letter from a garage or MoT station are now needed. Anyone got experience or know for sure?
( In the case of a like for like change I doubt that anyone would know or care but if you turn up for an MoT with more cylinders in your car than it had last year complications may arise - I want to avoid this scenario! )

View User's Profile E-Mail User View All Posts By User U2U Member
19sac65

posted on 5/1/14 at 10:03 AM Reply With Quote
I think that the receipt and garage confirmation is if emissions or road tax costs are altered,or a new build
If your replacing like for like i would think its just engine no they are interested in
Might be worth calling your local dvla office as info can vary from office to office
Ive just put a zetec in place of a cvh so will be doing the same

View User's Profile View All Posts By User U2U Member
coozer

posted on 5/1/14 at 10:07 AM Reply With Quote
I have just changed my 1297cc crossflow for a 3947cc V8. Sent the ebay receipt with a photo of the engine number.

I was expecting trouble but it all came back good, they even sent the photo back!





1972 V8 Jago

1980 Z750

View User's Profile Visit User's Homepage View All Posts By User U2U Member
bob

posted on 5/1/14 at 10:11 AM Reply With Quote
Engine change

Yes i had this last year when i changed from 1800 zetec to 2000 zetec, i used the letter from ford technical which stated the engine number year of fitment to vehicle on Fords production line.
This was letter from Fords was accepted in copy form, i presume other manufacturers have the same facility as Ford.

My request to Fords technical was originally to date the engine for emission purposes in the event the engine would be used at SVA/IVA.

If it is Ford you need i will try and fins the address.

Hope this helps.






View User's Profile View All Posts By User U2U Member
bob

posted on 5/1/14 at 10:16 AM Reply With Quote
Ford Technical Information Dept.
PO Box 300
Walsall
WS5 4QH

I asked for age of engine to be determined from the engine number i supplied.

Sent letter along with a stamped addressed envelope and week later it was back.

A telephone number is available for fords tech dept but it is £1 a minute.

Tel : 0906 5533447

Fax : 01922 725 266

[Edited on 5/1/14 by bob]






View User's Profile View All Posts By User U2U Member
cerbera

posted on 5/1/14 at 10:28 AM Reply With Quote
According to the website saynoto0870 there is a national rate number for the premium Ford technical number above.

020 3564 4444

[Edited on 5/1/14 by cerbera]

View User's Profile View All Posts By User U2U Member
bob

posted on 5/1/14 at 10:30 AM Reply With Quote
That's handy as i did use the original phone number 11/12 years ago and was not too happy with the cost for 5 minutes of hanging about.








View User's Profile View All Posts By User U2U Member
johnH20

posted on 5/1/14 at 10:49 AM Reply With Quote
Thanks for the above. In fact since posting I have done a Google search ( should have done that first I suppose! ) and the DVLA site confirms my recollection. Dementia deferred!
View User's Profile E-Mail User View All Posts By User U2U Member
scudderfish

posted on 5/1/14 at 07:55 PM Reply With Quote
When I went from a 3.5 V8 to a 4.3 earlier this year, I filled in the V5 and sent it back with only the hand written receipt I got from the original owner. That stated the engine number and the reg of the TVR it came from. I got the updated V5 back a couple of weeks later.
View User's Profile View All Posts By User U2U Member
Ben_Copeland

posted on 5/1/14 at 07:59 PM Reply With Quote
I tried to change my engine size and it all got returned and I was told I had to go to the local DVLA office as I couldn't do it via post

[Edited on 5/1/14 by Ben_Copeland]





Ben

Locost Map on Google Maps


Z20LET Astra Turbo, into a Haynes Roadster

Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.