Mark100
|
| posted on 6/12/14 at 03:10 PM |
|
|
this mondeo plate any specific model would tdci be better for torque ?????? st220 or year needed forgot all about it just treid the full zetec clutch
and spent 20 mins scratching my head woundering why it don't fit 
|
|
|
|
|
kingster996
|
| posted on 6/12/14 at 04:47 PM |
|
|
I have a flywheel and new clutch that I no longer need. £60 for both plus post.
I used to be indecisive, but now I'm not so sure
|
|
|
Mark100
|
| posted on 6/12/14 at 05:12 PM |
|
|
flywheel on spring plate fine just need to no witch friction plate I need thanks anyway
|
|
|
coozer
|
| posted on 6/12/14 at 07:33 PM |
|
|
quote:
Originally posted by Mark100
this mondeo plate any specific model would tdci be better for torque ?????? st220 or year needed forgot all about it just treid the full zetec clutch
and spent 20 mins scratching my head woundering why it don't fit
Don't worry about the torque, a standard clutch in a light car can handily a lot because the input to overcome the inertia is a lot lower.
Got any pics of the clutch? Zetec clutch will fit a zetec flywheel and mate up to a type 9.
1972 V8 Jago
1980 Z750
|
|
|
Mark100
|
| posted on 6/12/14 at 08:52 PM |
|
|
Flywheel just as pic on page one
clutch spring and plate from ebay link on page one
are these the right ones ??
the splines in the centre of the friction plate have not got the right number teeth ??????
code on plate c142-3 spring code 2650 oy13043
|
|
|
coozer
|
| posted on 6/12/14 at 09:18 PM |
|
|
Dunno mate, as long as the plate slides on the gearbox splines and the cover fits the flywheel it should go OK, what exactly is not fitting? Which
flywheel you got?
Steve
1972 V8 Jago
1980 Z750
|
|
|
Mark100
|
| posted on 6/12/14 at 10:09 PM |
|
|
The hole in the centre of the friction plate is to small for the gearbox shaft and it has the wrong number of teeth ???????????
|
|
|
