Matt21
|
| posted on 8/3/15 at 12:17 PM |
|
|
CBR900 Oil Clearances - haynes
Would anyone be kind enough to have a flick through their haynes manual and check what the oil clearances are for the main and conrod bearins the
crankshaft? 
1999 cbr900
Thanks!
|
|
|
|
|
ReMan
|
| posted on 8/3/15 at 10:13 PM |
|
|
See here :-)
http://www.locostbuilders.co.uk/photos.php?action=gal&user=ReMan&folder=Attachments
www.plusnine.co.uk
|
|
|
Matt21
|
| posted on 9/3/15 at 09:48 AM |
|
|
The link takes me to your photo page, there's 2 photos I believe are the ones I'm after but they're too blurry for me to make out 
|
|
|
Matt21
|
| posted on 9/3/15 at 09:55 AM |
|
|
I found clearances for the 893, which may be the same as 919
Main bearing: 0.0007 - 0.0014"
Con Rod: 0.0012 - 0.0020"
If these are the correct figures, then there doesn't seem to be a plastigauge product that does the size of the main bearing clearances, the
smallest one they do is 0.001 - 0.007" (red/orange box)
This is fine for the rod bearings and at the top end of the main bearings.
I also read somewhere that its the green plastigauge that I need, 0.007 - 0.02" but that's 'way' over range.
Or am I getting myself muddled up somewhere?
|
|
|
