aka Keith
|
posted on 9/6/15 at 08:47 AM |
|
|
Recommend me a machine shop near Bracknell
After some recent overheating issues I have to replace the head gasket, and I thought that I might as well get check the head and if necessary get it
skimmed. So can anyone recommend a place to get the head skimmed around the Bracknell/Reading area?
cheers
Craig
|
|
|
Rich J
|
posted on 9/6/15 at 09:25 AM |
|
|
These guys modified a head for me some years ago but also do general engine
machining work - well pleased with the results
[Edited on 9/6/15 by Rich J]
|
|
gaz_gaz
|
posted on 9/6/15 at 10:07 AM |
|
|
Roe Engineering
Fleet
01252 613404
Had loads of heads and blocks rebored by them in the past
|
|
ianm67
|
posted on 9/6/15 at 10:18 AM |
|
|
Speak to Iain Rowley at Delta Motorsport. First class......
http://www.deltamotorsport.co.uk/
Always biting off more than I can chew.....
|
|
ianm67
|
posted on 9/6/15 at 10:19 AM |
|
|
quote: Originally posted by Rich J
These guys modified a head for me some years ago but also do general engine
machining work - well pleased with the results
[Edited on 9/6/15 by Rich J]
Hmmmmm......... Very unpleasant experience with CFM in the past. Wouldn't use them again personally.....
Always biting off more than I can chew.....
|
|
stevebubs
|
posted on 9/6/15 at 11:34 AM |
|
|
Poor Experience with Clifford Cox; no idea if it's the same people running CFM but they have the same address and Phone Number...
|
|
stevebubs
|
posted on 9/6/15 at 11:34 AM |
|
|
Poor Experience with Clifford Cox; no idea if it's the same people running CFM but they have the same address and Phone Number...
|
|
avagolen
|
posted on 9/6/15 at 07:28 PM |
|
|
As Gaz_Gaz said,
Roe Engineering
Fleet
Very helpful - old school.
The Answer for everything, but never the last word....
|
|
pewe
|
posted on 10/6/15 at 09:41 AM |
|
|
quote: Originally posted by gaz_gaz
Roe Engineering
Fleet
01252 613404
Had loads of heads and blocks rebored by them in the past
My first stop for heads etc.
Cheers, Pewe10
|
|