Hammy360
|
| posted on 22/9/16 at 03:35 PM |
|
|
Zetec starter
Hi all,
Im fitting blacktop 2.0 Zetec to a type 9 with retroford flywheel and pinto clutch.
Does anyone know which starter I need, I believe its sierra 2.0 DOHC but can't remember.
Cheers
Hammy
|
|
|
|
|
AndyW
|
| posted on 22/9/16 at 04:19 PM |
|
|
I used a Lucas LRS707
Not sure about the flywheel though as I used standard one.
I got one of ebay brand new and was much cheaper than the kit suppliers. Works find and still going strong.
Andy
|
|
|
Hammy360
|
| posted on 22/9/16 at 04:50 PM |
|
|
Hi mate,
Thought so, like this one?
FORD SIERRA & SAPPHIRE 2.0 PINTO OHC & DOHC NEW RMFD STARTER MOTOR 1987-93
Hammy
|
|
|
AndyW
|
| posted on 22/9/16 at 04:53 PM |
|
|
FORD 87BB11000BA
FORD 87BB11000DA
looks like it to me. The above are the ford part numbers and cross ref to that one so looks good to go.
|
|
|
Hammy360
|
| posted on 22/9/16 at 05:37 PM |
|
|
cheers
quote:
Originally posted by AndyW
FORD 87BB11000BA
FORD 87BB11000DA
looks like it to me. The above are the ford part numbers and cross ref to that one so looks good to go.
Lovely thats what I thought as my donor for my last build was sierra 2.0 dohc and I was sure I used the starter from that.
PS. Andy, I'll let you know how the conversion is going when I get some time in the garage!
Blogs is here mate http://zetecstriker.blogspot.co.uk/
Hammy
|
|
|
obfripper
|
| posted on 22/9/16 at 06:24 PM |
|
|
quote:
Originally posted by Hammy360
Hi mate,
Thought so, like this one?
FORD SIERRA & SAPPHIRE 2.0 PINTO OHC & DOHC NEW RMFD STARTER MOTOR 1987-93
That one needs a 14mm spacer to correctly engage the flywheel, it does cross reference but is incorrect for this application without a spacer.
You need one of these for a direct fit:
http://www.woodauto.com/Component.aspx?Ref=STR50041
It has the shorter nose, and the linked one has planet reduction gears so smaller than the original lucas type and far more powerful (should be fine
cranking a hot engine).
Dave
|
|
|
Hammy360
|
| posted on 22/9/16 at 07:49 PM |
|
|
quote:
Originally posted by obfripper
quote:
Originally posted by Hammy360
Hi mate,
Thought so, like this one?
FORD SIERRA & SAPPHIRE 2.0 PINTO OHC & DOHC NEW RMFD STARTER MOTOR 1987-93
That one needs a 14mm spacer to correctly engage the flywheel, it does cross reference but is incorrect for this application without a spacer.
You need one of these for a direct fit:
http://www.woodauto.com/Component.aspx?Ref=STR50041
It has the shorter nose, and the linked one has planet reduction gears so smaller than the original lucas type and far more powerful (should be fine
cranking a hot engine).
Dave
Cheers, thanks
Hammy
|
|
|
Hammy360
|
| posted on 5/12/16 at 01:19 PM |
|
|
quote:
Originally posted by obfripper
quote:
Originally posted by Hammy360
Hi mate,
Thought so, like this one?
FORD SIERRA & SAPPHIRE 2.0 PINTO OHC & DOHC NEW RMFD STARTER MOTOR 1987-93
That one needs a 14mm spacer to correctly engage the flywheel, it does cross reference but is incorrect for this application without a spacer.
You need one of these for a direct fit:
http://www.woodauto.com/Component.aspx?Ref=STR50041
It has the shorter nose, and the linked one has planet reduction gears so smaller than the original lucas type and far more powerful (should be fine
cranking a hot engine).
Dave
Hi mate, can I just confirm again I have a retroford flywheel and pinto clutch http://www.retro-ford.co.uk/shop/content/zetec-rwd-flywheel-z015
Just want to triple check before ordering as the retroford starter is £120!
Cheers for your help
Hammy
|
|
|
loggyboy
|
| posted on 5/12/16 at 01:23 PM |
|
|
have you tried asking retro ford?
Mistral Motorsport
|
|
|
Hammy360
|
| posted on 5/12/16 at 01:30 PM |
|
|
quote:
Originally posted by loggyboy
have you tried asking retro ford?
Yes mate, they obviously said their one :-)
Hammy
|
|
|
obfripper
|
| posted on 5/12/16 at 02:10 PM |
|
|
The retroford flywheel is a pinto clutch pattern redrilled 1.8 zetec flywheel, so that starter should be fine.
Dave
|
|
|
Hammy360
|
| posted on 5/12/16 at 02:44 PM |
|
|
quote:
Originally posted by obfripper
The retroford flywheel is a pinto clutch pattern redrilled 1.8 zetec flywheel, so that starter should be fine.
Dave
Thanks mate, ordered at a big saving :-)
Hammy
|
|
|
