richard munnis
|
| posted on 17/2/17 at 10:14 PM |
|
|
Cbrr 1000 kitcar install
Hi folks anybody on this site fitted a 2010 onwards cbrr1000 engine to there kitcar car if so what way did the get around the injectors in the airbox
pictures would be very helpful many thanks Richard
|
|
|
|
|
sam919
|
| posted on 18/2/17 at 12:54 PM |
|
|
You can't, they stay. You can however get a lower air box from AB Performance.
A call to Andy Bates is worthwhile without doubt.
Alternatively if you google 'Knobby CBR Vortex' a guy has written a great blog on his build using this lump.
Also Facebook page JFS Auto Racing, more CBR install tech.
|
|
|
CosKev3
|
| posted on 18/2/17 at 01:17 PM |
|
|
If you really want to get rid of them go for four bigger injectors in lower position and after market management 
If you look at Roscos Haynes build on here he made a very nice bracket/holder for the top injectors on his ZX10R engine which allowed him to use a big
foam sausage filter
|
|
|
richard munnis
|
| posted on 18/2/17 at 02:18 PM |
|
|
Thank you
A big thank for all the reply so the Knooby cbr one is brilliant many thanks again Richard
|
|
|
