jps
|
| posted on 1/9/19 at 02:09 PM |
|
|
Ordering prop shaft - what 'ends' do I need to supply?
I need to order a propshaft for my Haynes, I have heard both Dunning and Fairbank and Bailey Morris well recommended on here, so intend to use one of
these.
I have a Sierra 7.5" diff and a Type 3 gearbox - which came from different cars. I do not have the end of the original propshaft which bolted
onto the diff, I do have the splined input shaft from the gearbox - which originally bolted to a rubber 'donut'.
Will a prop shaft supplier typically provide the flange which bolts to the diff, and the splined shaft to go into the gearbox - or would I be expected
to supply those?
And is there anything else I should know about spec-ing the propshaft (or will need to tell the supplier!)?
|
|
|
|
|
rusty nuts
|
| posted on 1/9/19 at 02:24 PM |
|
|
Bailey Morris supplied all new parts when I ordered my prop .
|
|
|
voucht
|
| posted on 1/9/19 at 03:16 PM |
|
|
Hi John,
quote:
Originally posted by jps
I need to order a propshaft for my Haynes, I have heard both Dunning and Fairbank and Bailey Morris well recommended on here, so intend to use one of
these.
I had my propshaft done by Dunning and Fairbank (from Sierra MT75 gearbox to Sierra 7'' diff.), and they did a very good job. I never
heard anything bad about them as well. And they are quick to deliver too. So I definitely recommend them
quote:
I have a Sierra 7.5" diff and a Type 3 gearbox - which came from different cars. I do not have the end of the original propshaft which
bolted onto the diff, I do have the splined input shaft from the gearbox - which originally bolted to a rubber 'donut'.
Provide them with all the informations you have. With their experience, I'm sure they will know what to put at what end.
quote:
Will a prop shaft supplier typically provide the flange which bolts to the diff, and the splined shaft to go into the gearbox - or would I be
expected to supply those?
They definitely have the flange to fit the Sierra diff. I don't know for the splined shaft that fit the type 3 gerabox, but I doubt it will be a
problem for them.
For my MT75, I had to get rid of the rubber doughnut, and their propshaft bolts on the Sierra MT75 gearbox tri arm flange via a steel adaptor they
provided (with the complete bolt kit). I haven't have to send them anything.
 
Description
 
Description
 
Description
Hope that will help 
https://vouchtroadster.blogspot.com/
https://cafrazx550.blogspot.com/
|
|
|
Eddie1978
|
| posted on 1/9/19 at 08:00 PM |
|
|
I used Driveline propa few months ago. type9 to large flange english, all brand new parts painted and
balanced £110 delivered to my door 4days from ordering to been in my hands.
Really easy to deal with rang them up told them which ends total length etc... totally painless
[Edited on 1/9/19 by Eddie1978]
|
|
|
.jpg)
