GaryM
|
| posted on 30/6/21 at 08:05 PM |
|
|
Xflow Oil Pickup sealant
Ford Crossflow.
What sealant should i use where the oil pickup tube enters the block?
Ta
Gary
|
|
|
|
|
steve m
|
| posted on 30/6/21 at 08:15 PM |
|
|
none, its a press in fit
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
GaryM
|
| posted on 30/6/21 at 08:23 PM |
|
|
Mine doesn’t fit that tightly so I need to seal the gap to stop the oil pump sucking air.
|
|
|
snapper
|
| posted on 30/6/21 at 09:06 PM |
|
|
You can swag the tube for a tighter fit and use locktight
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
David Jenkins
|
| posted on 30/6/21 at 09:11 PM |
|
|
I sleeved the join on mine, and soft-soldered it. Had to do some thorough cleaning before I started though.
|
|
|
