garage19
|
 posted on 2/2/05 at 09:22 AM |
|
|
Fuel rail?
Any one made their own fuel rails?
What material have you used?
I'm after some 15 x 15mm steel box section or similar but can't find any any where. 
Even checked out the office furnture to see if there is anything I can cut up!
|
|
|
|
|
nick205
|
| posted on 2/2/05 at 10:06 AM |
|
|
expensive option I know, but I did notice that Homebase are selling various strips, tubes, extrusions and box section. You may be able to find it
there!
Alternatively try a local welding/fabriacation company for an offcut.
Nick
|
|
|
CairB
|
| posted on 2/2/05 at 12:41 PM |
|
|
Is this of any interest:
Click Here
Please let me know if you decide to go this way or find a UK supplier as I would be interested in some too.
Cheers,
Colin
|
|
|
ned
|
| posted on 2/2/05 at 01:12 PM |
|
|
what about using some hollow ally tube (homebase, b&q, maybe model shops) and using that diy ally welding stuff with a blow torch to make the
fitment bits for injectors etc?
Ned.
beware, I've got yellow skin
|
|
|
