sdv builder
|
| posted on 9/4/05 at 09:05 PM |
|
|
2L Pinto to Type 9
Anyone know what bolts fit the 2L Pinto to the Type 9 Gearbox. M8 is too small and M10 doesn't seem to screw in.
|
|
|
|
|
davidwag
|
| posted on 9/4/05 at 09:09 PM |
|
|
Hi, If its not metric it'll be 3/8 unc
|
|
|
RogerM
|
| posted on 9/4/05 at 09:23 PM |
|
|
I think it is 3/8 but if I remember right there are two UNF ones and the rest are UNC ... might be wrong, it might be the starter ... I might just
have had 1 too many ... hic
|
|
|
nick205
|
| posted on 10/4/05 at 06:42 AM |
|
|
Roger - I think you might be right, UNC for the block to bell housing and UNF or Metric fine for the starter. It's a while since I put mine
back together, so could well be wrong though.
Nick
|
|
|
jacko
|
| posted on 10/4/05 at 07:23 AM |
|
|
Hi the bolts in my pinto are 10mm metric
Jacko
|
|
|
sdv builder
|
| posted on 11/4/05 at 07:17 AM |
|
|
Now I'm confused, can anyone else confirm the sizes?
|
|
|
andyharding
|
| posted on 11/4/05 at 08:45 AM |
|
|
All mine are 10mm metric.
Are you a Mac user or a retard?
|
|
|
Benzine
|
| posted on 11/4/05 at 10:00 AM |
|
|
I used M10s
|
|
|
sdv builder
|
| posted on 11/4/05 at 07:02 PM |
|
|
bought a brush on the way home tonight. Cleaned all the threads up and bolted the engine and gearbox together using M10s. Was supprised how well
they went together.
Thanks for the help.
|
|
|
stevebubs
|
| posted on 11/4/05 at 09:07 PM |
|
|
quote:
Originally posted by sdv builder
Now I'm confused, can anyone else confirm the sizes?
All M10
|
|
|
