Cousin Cleotis
|
posted on 18/5/05 at 05:42 PM |
|
|
cvh camshaft removal
i can only get the camshaft abot 5cm out of the head then it hits something, any ideas?
Thanks, Paul
|
|
|
rusty nuts
|
posted on 18/5/05 at 05:48 PM |
|
|
rockers , fuel pump push rod , cam locating plate ?
|
|
Berracvh
|
posted on 18/5/05 at 05:49 PM |
|
|
Are you taking it out the back ?
|
|
Peteff
|
posted on 18/5/05 at 05:52 PM |
|
|
Have you pulled the oil seal?
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
Cousin Cleotis
|
posted on 18/5/05 at 08:21 PM |
|
|
im taking it out of the front, is that the problem? i would have thought the bearings would have been bigger at the front?
rockers, fuel pump, oil seal etc are removed.
Thanks, Paul
|
|
Cousin Cleotis
|
posted on 26/5/05 at 09:18 PM |
|
|
i removed the camshaft from the back of the head once i removed the cam pully, thank for the help.
Paul
|
|