macspeedy
|
| posted on 24/6/03 at 04:33 PM |
|
|
throttle cable
looking for a good source for throttle cable, is the stuff they use on push bikes anygood?
|
|
|
|
|
theconrodkid
|
| posted on 24/6/03 at 04:48 PM |
|
|
if your using a pinto nas yr avatar says,the std seirra cable fits a treat,just need ball from seirra pedal welded onto mk pedal
who cares who wins
pass the pork pies
|
|
|
macspeedy
|
| posted on 24/6/03 at 08:52 PM |
|
|
eh!
|
|
|
Rob Lane
|
| posted on 25/6/03 at 09:03 AM |
|
|
I've used a bike stainless steel brake cable from a local cycle store. Very cheap, about 2 pounds all in plus 1 pound for a second inner in
case first breaks.
Never needed 2nd as first is still OK.
just make sure you use a swivel at both ends and it has no chafing points.
Teflon lined outer sheaths are also available but cost about 5 pounds.
|
|
|
paulbeyer
|
| posted on 25/6/03 at 11:41 PM |
|
|
Rob do you have any pictures of this setup?
7 out of 10 people suffer with hemorrhoids. Does that mean the other 3 enjoy them?
|
|
|
