oadamo
|
| posted on 10/5/07 at 09:14 PM |
|
|
2L zetec
hi ive got a 2L zetec engine what would i need for a rwd conversion.what gearbox would be best a type9 or a mt75 and ive read about a bearing on the
shaft in the gear box. i cant find a how to guide that tells you all about it just bits
thanks adam
|
|
|
|
|
UncleFista
|
| posted on 10/5/07 at 09:22 PM |
|
|
Lots of info HERE
Tony Bond / UncleFista
Love is like a snowmobile, speeding across the frozen tundra.
Which suddenly flips, pinning you underneath.
At night the ice-weasels come...
|
|
|
Danozeman
|
| posted on 10/5/07 at 09:24 PM |
|
|
www.zetec-cat.co.uk will tell you all you need to know.
Basically, 1.8 escort/fiesta water pump and pulley, pinto spigot brg, type 9 gearbox and capri release brg.
Youl find 1.8 zetec flywheel is lighter than 2 litre and use this with standard mondeo 1.8 clutch assy.. Escort 1.8 sumps are shallower that 2 litre
so give you more ground clearance.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
oadamo
|
| posted on 10/5/07 at 09:29 PM |
|
|
short but sweet lol thanks
|
|
|
Chippy
|
| posted on 10/5/07 at 09:41 PM |
|
|
Engine and gearbox combinations. Try this site.
[url=http://www.gibbs111.fsnet.co.uk/eng_gear_comb.htm]
Very informative. HTH Ray
Gives the details for both Type 9, and MT75, plus all the parts that are needed.
[Edited on 10-5-07 by Chippy]
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
