viatron
|
| posted on 15/7/07 at 07:37 PM |
|
|
R1 bike carb drawings/diagrams
Anyone know where i can get hold of a set of drawings / exploded parts diagrams for R1 bike carbs?
Cheers
Mac
|
|
|
|
|
Pdlewis
|
| posted on 15/7/07 at 07:40 PM |
|
|
How odd i was just going to post exactly the same as i need to know how easy it would be to re-space them.
Would be very interested if anyone knows
Cheers
Paul
|
|
|
asn163
|
| posted on 15/7/07 at 07:48 PM |
|
|
Is this what you are looking for?
http://216.37.204.206/alljet/Yamaha_OEM/YamahaMC.asp?Type=13&A=302&B=13
hth,
Simon
|
|
|
AspectCarl
|
| posted on 15/7/07 at 07:57 PM |
|
|
Whole Yamaha service manual available here MY 98/99 Service Manual
See section 6 for carbs.
DSR Racer - All Docs
Also avilable here is Model Year 2000 supplement and service manual for MY 2002 onwards.
[Edited on 15/7/07 by AspectCarl]
Carl
|
|
|
viatron
|
| posted on 15/7/07 at 08:00 PM |
|
|
Class, thanks guys spot on, cheers for that
Mac
[Edited on 15-7-2007 by viatron]
|
|
|
big_wasa
|
| posted on 15/7/07 at 08:10 PM |
|
|
returned your u2  saved me a job 
[Edited on 15/7/07 by big_wasa]
|
|
|
bbwales
|
| posted on 16/7/07 at 07:45 AM |
|
|
Hi,
I split my carbs up, R1, the 2 outer carbs needed splitting by 40 & 45 mm. I used threaded bar to make the 2 new long securing bar and then
turned down the 5 linking pipes out of stainless. for the air link pipes i used ali pipe and they work fine.
The choke i extended using round bar and the throttles i extended using flat plate.
I put ali pipe around the 2 long bolts to make it look tidier.
They do work fine.
Regards
Bob
[Edited on 16/7/07 by bbwales].JPG)
|
|
|
