tegwin
|
| posted on 5/12/07 at 04:24 PM |
|
|
Exhaust bobbins thread size?
I have two identical exhaust cotton reel bobin type mounts...They have 8mm studs comming out of each side, but they dont seem to be the standard 8mm
thread pitch..
Anyone have any idea what nut I need for them?
|
|
|
|
|
andrew.carwithen
|
| posted on 5/12/07 at 04:29 PM |
|
|
Mine were 5/16 UNF
Andy.
|
|
|
flak monkey
|
| posted on 5/12/07 at 04:29 PM |
|
|
They will be 5/16UNF i should think. May be UNC.
David
Sera
http://www.motosera.com
|
|
|
paulf
|
| posted on 5/12/07 at 04:29 PM |
|
|
There most likely 5/16 unf most of the mini type ones ive seen are that thread.
Paul.
|
|
|
ernie
|
| posted on 5/12/07 at 06:18 PM |
|
|
If using halfords ones which are very strong, you re-thread them using 8mm nut
|
|
|
indykid
|
| posted on 5/12/07 at 09:21 PM |
|
|
halfords ones are 5/16ths UNF too
tom
|
|
|
.jpg)
