Northy
|
| posted on 19/10/03 at 07:31 PM |
|
|
Silicon hoses
Hi everyone,
Two questions for you.
I've seen that silicon hoses come in lots of different diameters. How easy is it to force a hose that is slightly too small onto an outlet?
Also, how easily will a hose that is slightly too big squash down onto a smaller outlet? My problem is this, outlet on thermostat housing, and inlet
on the pump are both 34mm diameter, both inlet and outlet on the rad are 31 1/2 mm. Do i really need to buy reducers etc?
Secondly, where is the cheapest place to buy them? I've noticed Demon Thieves are more expensive than Rally Design. Anyone know anywhere
else?
Cheers,
Graham
Website under construction. Help greatfully received as I don't really know what I'm doing! 
"If a man says something in the woods and there are no women there, is he still wrong?"
Built 2L 8 Valve Vx Powered Avon
|
|
|
|
|
Stu16v
|
| posted on 19/10/03 at 09:21 PM |
|
|
Silicon hoses can be purchased with differing diameter ends IIRC.....
Dont just build it.....make it!
|
|
|
skippad
|
| posted on 19/10/03 at 11:46 PM |
|
|
silicon hoses
You have a supplier on your doorstep...
Motorscope at Northallerton, cheaper than Demon Chirps.
|
|
|
bob
|
| posted on 20/10/03 at 08:17 AM |
|
|
http://www.thinkauto.com
i've had a few bits from them,prices are ok for what i needed.
Nice people too and very helpfull.
|
|
|
Northy
|
| posted on 20/10/03 at 05:37 PM |
|
|
Cheers guys,
But how well can they be made to fit slightly under / over size inlets and outlets?
Cheers
Graham
Website under construction. Help greatfully received as I don't really know what I'm doing!
"If a man says something in the woods and there are no women there, is he still wrong?"
Built 2L 8 Valve Vx Powered Avon
|
|
|
Stu16v
|
| posted on 20/10/03 at 06:25 PM |
|
|
quote:
Silicon hoses can be purchased with differing diameter ends IIRC.....
See above.... 
Dont just build it.....make it!
|
|
|
Northy
|
| posted on 20/10/03 at 07:49 PM |
|
|
But only in short lengths, as I said earlier, reducers. Its just I could imagine normal rubber pipes being forced onto slightly too big outlets, and
nipped up on those that are slightly too small.
Just wondered how pliable a Silicon hose was 
Cheers
Graham
Website under construction. Help greatfully received as I don't really know what I'm doing!
"If a man says something in the woods and there are no women there, is he still wrong?"
Built 2L 8 Valve Vx Powered Avon
|
|
|
fastavatar.jpg){kind=avatar}
