blakep82
|
| posted on 28/2/08 at 08:32 PM |
|
|
ecotec inlet manifold
can't remember if i asked this before and can't find anything on the search
whats the best way to shape the tubes for these flanges or do i just weld the tubes on round? and what length should i make the runners?
zzr1100 carbs on a 2.0 ecotec
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
MikeRJ
|
| posted on 28/2/08 at 08:47 PM |
|
|
quote:
Originally posted by blakep82
whats the best way to shape the tubes for these flanges
A vice or careful application of the percussive spanner should do the trick. As long as the inside circumference of your port runners is the same as
the ovalised port you should have a nice smooth transition to the throttle bodies.
|
|
|
blakep82
|
| posted on 28/2/08 at 08:51 PM |
|
|
for some reason the pic doesn't work... the ports aren't oval
here's another one
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
jacko
|
| posted on 28/2/08 at 09:11 PM |
|
|
HI have a look in my photos under zx9r carbs you will see how i made my manifold + the jig i used to make it
Jacko
|
|
|
