mgmiller
|
| posted on 6/3/08 at 08:12 PM |
|
|
MT75 Hydraulic conversion
Hi
Has anyone done a hydraulic clutch conversion to a clutch cable MT75 gearbox. If so what is required and where can I buy the parts?
Also where can I get a quick shift for the box? I'm looking for a more positive feel to the gearstick.
Cheers
Mark
|
|
|
|
|
r1_pete
|
| posted on 6/3/08 at 08:57 PM |
|
|
I'm looking at ways of doing the same thing, favorite at the moment is a slave cylinder at the back of the clutch arm pushing forwards.
Quick Shift - bit dear for my money, I've shortened the lever - same effect.
To make the shift more precise do away with the rubber mountings on the shift cage, I've welded discs in the lower mounts and re workked the top
mounts by welding corners into the cage and drilling them.
Pete.
[Edited on 6/3/08 by r1_pete]
[Edited on 6/3/08 by r1_pete]
|
|
|
Schrodinger
|
| posted on 6/3/08 at 09:04 PM |
|
|
Do a search on fleabay you will find that there are a number hydraulic clutchs from different cars for sale.
Keith
Aviemore
|
|
|
mgmiller
|
| posted on 7/3/08 at 01:26 PM |
|
|
How about using a CONCENTRIC CLUTCH SLAVE CYLINDER from a mondeo.
I think the input haft size is the same! or am I wrong?
|
|
|
