chrsgrain
|
| posted on 4/4/08 at 04:41 PM |
|
|
Daft r1 fuel pump question!
Hi all,
Just got the R1 pump for my bike carb install - stupid question - which way round does it go!? Which hole in in, and which one out? The other way of
working it out is, I've still got the original filter attached, is that a prepump or post pump filter???
Thanks
Chris
Spoing! - the sound of an irony meter breaking...
|
|
|
|
|
welderman
|
| posted on 4/4/08 at 04:44 PM |
|
|
bent one is the fuel feed and the straight one is fuel return
sorry mines injected
[Edited on 4/4/08 by welderman]
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
jacko
|
| posted on 4/4/08 at 04:44 PM |
|
|
Pour fuel in the pump // wire it to a battery and mind your eyes
|
|
|
chrsgrain
|
| posted on 4/4/08 at 04:49 PM |
|
|
Oh... here is a (bad) picture...
Hope its not an injection pump....
Chris
Spoing! - the sound of an irony meter breaking...
|
|
|
locoboy
|
| posted on 4/4/08 at 05:04 PM |
|
|
Filter is pre pump.
NOTE, its also worth putting one post pump too.
ATB
Locoboy
|
|
|
Mr Whippy
|
| posted on 4/4/08 at 05:04 PM |
|
|
the filter is most likely to have been fitted before the fuel enters the pump to protect it from wear.
pah beaten to it ^^^ oh well least I gave an explanation  
[Edited on 4/4/08 by Mr Whippy]
|
|
|
r1_pete
|
| posted on 4/4/08 at 05:37 PM |
|
|
Filter is tank side, just been putting the tank cover on my R1 so checked for you...
|
|
|
chrsgrain
|
| posted on 4/4/08 at 06:16 PM |
|
|
Thanks guys,
I've already got a pre and post pump filter, so will take the small one off this pump - at least I know which way round to fit it now!
Chris
Spoing! - the sound of an irony meter breaking...
|
|
|
