tcr
|
 posted on 24/4/08 at 05:45 PM |
|
|
bike carb jets
i need to re-jet some 900 fireblade carbs for my 2.1 pinto,does anyone out there do a mailorder kit for cec's ? or can anyone suggest what i
need
MK MIDI ZX10R
http://www.facebook.com/media/set/?set=a.4393256076054.2182513.1427988207&type=1&l=64c91c3c17
why isnt anything simple!!!
torquetune.co.uk
nrpexhausts.co.uk
|
|
|
|
|
rusty nuts
|
| posted on 24/4/08 at 06:04 PM |
|
|
Haven't done it myself but I think most people drill them out using micro drills . Did get a set of ebay for about £3? but change plans.
|
|
|
blakep82
|
| posted on 24/4/08 at 06:30 PM |
|
|
1.8mm is usually used for 2ltr engines i think... but don't go with me on that! its just an observation. a starting point, if you like
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
tcr
|
| posted on 24/4/08 at 06:38 PM |
|
|
will bike shops stock this size or will i need to use option 1
MK MIDI ZX10R
http://www.facebook.com/media/set/?set=a.4393256076054.2182513.1427988207&type=1&l=64c91c3c17
why isnt anything simple!!!
torquetune.co.uk
nrpexhausts.co.uk
|
|
|
westf27
|
| posted on 24/4/08 at 07:04 PM |
|
|
I think you will find weber downdraught jets will screw in there,but as previously said you can jet drill them,resolder and drill again if necessary.I
would think for a 2.1 you will need about 1.7 or you may may find it runs out of puff at the top end.The Jacko chappie on here is worth a shout
|
|
|
jacko
|
| posted on 24/4/08 at 08:42 PM |
|
|
quote:
Originally posted by westf27
I think you will find weber downdraught jets will screw in there,but as previously said you can jet drill them,resolder and drill again if necessary.I
would think for a 2.1 you will need about 1.7 or you may may find it runs out of puff at the top end.The Jacko chappie on here is worth a shout
Well thankyou kind sir 
TCR you have u2u
[Edited on 24/4/08 by jacko]
|
|
|
DarrenW
|
| posted on 24/4/08 at 09:00 PM |
|
|
Mine is 2.0 and jets are 1.6mm on ZZR1100 40mm choke carbs.
Very easy to drill out. Did mine by hand (not using power drill).
Fully recommend boggs for the final rolling road set up.
|
|
|
bill132hotrod
|
| posted on 24/4/08 at 09:10 PM |
|
|
Give bogg brothers a call the old boy i spoke to is a world of knollage and an absolute diamond to chat too a wealth if imfo and very pleased to help
you out even if its just a chat give him a call.el
PERSEVERANCE is the word of the week. Stick with it the results are SWEET.
|
|
|
DarrenW
|
| posted on 25/4/08 at 08:46 AM |
|
|
quote:
Originally posted by bill132hotrod
Give bogg brothers a call the old boy i spoke to is a world of knollage and an absolute diamond to chat too a wealth if imfo and very pleased to help
you out even if its just a chat give him a call.el
Cant agree more. my first contact with Boggs was to offer them money for the carb settings i needed 9i figured it was the result of experience etc
that they would know so a valuable bit of knowledge to get cars fired up). he would hear none of it and just told me over the phone.
I ordered a manifold off them 2 weeks later - such was the warm feeling they left me with.
The 2 brothers were great to deal with during the fabrication stages - nothing is a trouble. Following that i found Dave fascinating to talk to during
rolling road session and their garage is like a petrolheads museum.
|
|
|
SPYDER
|
| posted on 26/4/08 at 07:28 PM |
|
|
Hi there. I assume it is the MAIN jets we are talking about here. If so I've got lots of them, all different sizes. I may not have 180's
but I've got some small drills to make some up. You are welcome to come and see. I'm only a few miles away in KIRKBY. I've got lots
of smaller sizes around 120's. You could experiment for yourself.
U2U me.
Geoff.
|
|
|
tcr
|
| posted on 27/4/08 at 08:14 PM |
|
|
cheers all
the carbs and manifold are from robinhood at their new place near ollerton and come complete with backplate for filter and whatever takeoffs eg servo
u want they even going to drill the jets out for me to 1.7mm so i can just bolt on and go
geoff i find its not right ill u2u thanks
[Edited on 27/4/08 by tcr]
MK MIDI ZX10R
http://www.facebook.com/media/set/?set=a.4393256076054.2182513.1427988207&type=1&l=64c91c3c17
why isnt anything simple!!!
torquetune.co.uk
nrpexhausts.co.uk
|
|
|
.jpg)
