sprouts-car
|
| posted on 2/6/08 at 03:54 PM |
|
|
English axle
I'm looking to order a prop shaft and need to know the bolt pattern for an English axle flange.
I'm sure many of you have had to find this info before.
Have done some searching but no luck.
-and / or-
Does anyone have any prop shafts for sale. Looking for a type 9 to English axle one.
Thanks,
Chris
|
|
|
|
|
stevebubs
|
| posted on 2/6/08 at 03:58 PM |
|
|
Just to add confusion - is your axle big or small flange (there are 2!)
|
|
|
sprouts-car
|
| posted on 2/6/08 at 04:01 PM |
|
|
quote:
Originally posted by stevebubs
Just to add confusion - is your axle big or small flange (there are 2!)
Bother!
|
|
|
sprouts-car
|
| posted on 2/6/08 at 04:28 PM |
|
|
I seem to remember it the bolts were 45mm on one side and 55mm on the other. ie in a rectangle.
not sure though about that
Chris
|
|
|
mr henderson
|
| posted on 2/6/08 at 04:30 PM |
|
|
You might find that the prop-shaft people know the answer already
John
|
|
|
001Ben
|
| posted on 2/6/08 at 05:34 PM |
|
|
I think the large flange is 109mm and the small flange is 96mm
|
|
|
David Jenkins
|
| posted on 2/6/08 at 06:06 PM |
|
|
In my case I just told the propshaft man the diameter of the flange and he was happy.
When I got it, it fitted perfectly.
|
|
|
Werner Van Loock
|
| posted on 2/6/08 at 07:13 PM |
|
|
Very good topic, I also need one T9 to english
group buy anyone? 
http://www.clubstylus.be
|
|
|
sprouts-car
|
| posted on 2/6/08 at 07:17 PM |
|
|
quote:
Originally posted by Werner Van Loock
Very good topic, I also need one T9 to english
group buy anyone?
Well thats 2 of us. Anyone else?
|
|
|
Danozeman
|
| posted on 2/6/08 at 07:17 PM |
|
|
If you use one of the well known places they will already know. Just tell them the diameter as David says. Mine came from dunning and fairbank and
they I told them type 9 to english axle. measured the flange while i was on the phone.
They7 need that and the length from tip of box to the diff flange.
Job done.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
sprouts-car
|
| posted on 2/6/08 at 07:58 PM |
|
|
quote:
Originally posted by Danozeman
If you use one of the well known places they will already know. Just tell them the diameter as David says. Mine came from dunning and fairbank and
they I told them type 9 to english axle. measured the flange while i was on the phone.
They7 need that and the length from tip of box to the diff flange.
Job done.
How much did you pay for it (If you dont mind me asking)?
Chris
|
|
|
