Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: FWD Nissan Twin Cams
Cazzy R

posted on 24/6/04 at 05:08 PM Reply With Quote
FWD Nissan Twin Cams

Does any one know if the 2 litre 16v motor from the Primera can be used in RWD applications?
AFAIK it's an all alloy jobbie knocking out around 140 BHP as standard.
Maybe a gearbox and bellhousing from a Silvia Turbo or even an earlier Datsun might mate up?

View User's Profile View All Posts By User U2U Member
Tblue

posted on 24/6/04 at 06:18 PM Reply With Quote
What about the SX200 gearbox (and engine come to think about it)?
View User's Profile View All Posts By User U2U Member
zilspeed

posted on 24/6/04 at 06:20 PM Reply With Quote
A quick google reveals the engine in the primera to be an SR20DE while the engine in the 200sx is the SR20DET.
Too close to be a coincidence surely. Same bellhousing pattern ? Probably.






View User's Profile E-Mail User View All Posts By User U2U Member
JoelP

posted on 24/6/04 at 07:26 PM Reply With Quote
is the sr20de engine the one in a primera gt? this is truely an awesome lump by all accounts, revs to 8k or more?






View User's Profile View All Posts By User U2U Member
Noodle

posted on 24/6/04 at 08:04 PM Reply With Quote
The 't' on the 200sx engine means Turbo.

My '95 eGT Primera recvs to 9,000 rpm and is rated at 150bhp.

Cheers,

Neil.





Your sort make me sick

View User's Profile Visit User's Homepage View All Posts By User U2U Member
blueshift

posted on 24/6/04 at 08:49 PM Reply With Quote
It is an SR20DE in the eGT and it's littler cousins like my SLX (doesn't rev as high, 125bhp)

the capitalisation is important, the SR20De for example is the single-point injection model (not as good).

pulsar GTI-R has the SR20DET in it, makes 230bhp stock I think. 4wd though.

View User's Profile Visit User's Homepage View All Posts By User U2U Member
zilspeed

posted on 24/6/04 at 11:12 PM Reply With Quote
So, in short, a 2.0 motor from a primera could - in theory - hook right up to a 200sx gearbox ?
Induction would have to be via a custom plenum I suppose. Unless you want to throw big money at throttle bodies and all that electro-sparkly-ecu-brain type nonsense.
This engine was also used in the bonkers Tommy Kaira ZZ thing in the mid nineties.
That used quad Keihin carbs though. Flat slides and had zero driveability.






View User's Profile E-Mail User View All Posts By User U2U Member
Peteff

posted on 24/6/04 at 11:23 PM Reply With Quote
Look at the 2.0 Serena or Vanette vans. got to be worth a try. Remote gearchange and not too big. Don't know what ratios they use though.





yours, Pete

I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.

View User's Profile View All Posts By User U2U Member
locost_bryan

posted on 25/6/04 at 04:18 AM Reply With Quote
Silvia/180SX/200SX all use the same RWD gearbox, as far as I can find out.

180SX was CA18 (na or turbo) up to 1991ish (to S13).

200SX is SR20DE (atmo) or SR20DET (turbo) from 1991ish (S14 on). Loved by Japs for drifting

Should be a straight bolt in. Later 200SX also had 6-speed option.

Beware of poor maintenance - irregular oil changes can block camshaft oil galleries and cause the camshaft to sieze, which breaks the timing chain and lunches the valves/pistons!





Bryan Miller
Auckland NZ

Bruce McLaren - "Where's my F1 car?"
John Cooper - "In that rack of tubes, son"

View User's Profile View All Posts By User U2U Member
Cazzy R

posted on 25/6/04 at 12:16 PM Reply With Quote
Isn't the 200sx 'box a big hulking thing to handle the torque though? That is to say larger than a Ford Type 9?
View User's Profile View All Posts By User U2U Member
gjn200

posted on 25/6/04 at 10:43 PM Reply With Quote
No. Just a bit longer so you dont have to extend the gear lever and its a bit lighter. It fitted fine in my tunnel.





<- Me!

View User's Profile View All Posts By User U2U Member
Cazzy R

posted on 26/6/04 at 07:33 PM Reply With Quote
quote:
Originally posted by gjn200
No. Just a bit longer so you dont have to extend the gear lever and its a bit lighter. It fitted fine in my tunnel.


Hmmm, that's interesting.
The plenum chamber is the along the side log type rather than the over the top zetec type. So it might fit under th bonnet????

View User's Profile View All Posts By User U2U Member
Trev Borg

posted on 27/6/04 at 04:43 PM Reply With Quote
Was thinking of using the 200sx as a donor for my Autotune gemini.

The stock CA18DET in the pre 1995 200sx is a detuned engine and produces approx. 175 BHP.

With just a little freeing they will give 250.
(so i'm told)

Nissan engine tree below

http://www.sr20det.nismo.org/nissanengines.htm

As time goes by , this looks like a better option for me. THe gemini has a fair amount of room, and should be able to fit the intercooler in.





Before you judge a man, walk a mile in his shoes.

By that time, who cares.

You're a mile away, and you've got his shoes

View User's Profile E-Mail User View All Posts By User U2U Member
gjn200

posted on 28/6/04 at 03:33 PM Reply With Quote
quote:
Originally posted by Trev Borg


With just a little freeing they will give 250.
(so i'm told)




Hmmm, not quite. Bigger i/c,bigger turbo,chip,filter, decent exhaust and probably fuel pump. £1250 upwards.....

A guy in the Scottish kit car club has done it, I gave up with the electrics





<- Me!

View User's Profile View All Posts By User U2U Member
zilspeed

posted on 28/6/04 at 04:58 PM Reply With Quote
quote:
Originally posted by Trev Borg
Was thinking of using the 200sx as a donor for my Autotune gemini.




Ohh, I like the Gemini. There's been one in speed events in Scotland for donkeys years. Melvyn Hartley is the fella - maybe you know / know of him.
Here's the car

[Edited on 28/6/04 by zilspeed]






View User's Profile E-Mail User View All Posts By User U2U Member
Trev Borg

posted on 29/6/04 at 10:15 PM Reply With Quote
She is indeed a pretty thing.

oh and at the price mentioned above, i think i'll just stick with the 175 BHP





Before you judge a man, walk a mile in his shoes.

By that time, who cares.

You're a mile away, and you've got his shoes

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.