Lars
|
| posted on 30/7/04 at 02:56 PM |
|
|
fuel pipe
http://www.screwfix.com/app/sfd/sea/searchresults.jsp?_dyncharset=UTF-8&pn=1&pd=1&pi=1&cn=1&cd=1&q=&n=74872&x=2&y=
5
is the above micro bore pipe the same as that people buy from B&Q for fuel pipe?
Its about half as much
|
|
|
|
|
mangogrooveworkshop
|
| posted on 30/7/04 at 03:15 PM |
|
|
B&Q and Screwfix are owned by the same crowd KINGFISHER last time we looked.
The microbore 8 &10 will carry petrol no bother just remember to use the correct grade of flexi pipe.
|
|
|
Lars
|
| posted on 30/7/04 at 04:14 PM |
|
|
cheers
have already picked up some short length of rubber pipe, so just need some of that microbore stuff
|
|
|
Mark Allanson
|
| posted on 30/7/04 at 05:16 PM |
|
|
Learn by my mistake, get the thicher wall version, the thin wall is unbendable even with a tube bender, it just kinks - I ended buying galved steel
petrol pipe, tuogh as hell but will bend to tight raduii
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Lars
|
| posted on 30/7/04 at 05:24 PM |
|
|
i might get some more rubber hose then, or use the rubber hose i have to make the bends.
thanks for the warning though
|
|
|
JoelP
|
| posted on 30/7/04 at 07:58 PM |
|
|
i used rubber hose all the way. Is there a reason for not wanting to use this? is microbore better? with mine, there are only 4 joints from end to
end. tank, engine and 2 at the filter.
|
|
|
Lars
|
| posted on 30/7/04 at 09:52 PM |
|
|
i think its just that micro bore is a bit cheaper.
would prefer less joints though
[Edited on 30/7/04 by Lars]
|
|
|
