AndyW
|
| posted on 27/8/12 at 09:28 PM |
|
|
bonnet cutting for exhaust, enough clearance??
Hi guys n gals,
Before I cut the bonnet I have made a template to see how much clearance I have and to try and have to only cut once. Please have a look at the pic
and let me know what you think. I have measured just a tad over 5mm between the pipes and the bonnet. There will ovbiously be a trim tp go one but
thats about 1.5mm thickness.
Not a great picture but my rubbish phone does not have a flash or anything clever like that!!
Thanks
Andy
[Edited on 27/8/12 by AndyW]
|
|
|
|
|
loggyboy
|
| posted on 27/8/12 at 09:40 PM |
|
|
Ally or FG bonnet? if FG i would want min 15mm clear even if trimming, If alloy I would want about 10mm clear.
Mistral Motorsport
|
|
|
AndyW
|
| posted on 27/8/12 at 10:00 PM |
|
|
Sorry forgot to say, it's an alloy bonnet.
|
|
|
snapper
|
| posted on 28/8/12 at 01:42 AM |
|
|
Ally won't burn so that's a good start, the next issue is how much the engine moves on the mounts when you rev it, brake hard etc.
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
