marc r1
|
| posted on 9/11/04 at 11:36 PM |
|
|
r1 engine
anyone done an mk with ri engine in. read an article about exup vavle needed to be left in wiring loom due to cdi produc ing fault code if sensed not
there? also did wiring loom prove difficult? any advice welcome
|
|
|
|
|
colibriman
|
| posted on 10/11/04 at 12:18 AM |
|
|
there are quite a few been built now..
R1 Indy builders on here include OX and SUBK2002 and ATHOIRS...
as long as you have the exup motor you can leave it plugged into the loom but not connected to the original exup valve..
the wiring of the carb ones is pretty straight forward..
Hope this helps
need a bike engine? - www.colibriman.com
SVA ready Mk Indyblade possibly for sale.....if the offers good...!
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
marc r1
|
 posted on 11/11/04 at 08:45 PM |
|
|
thanks mate
|
|
|
