nick205
|
 posted on 5/12/04 at 11:42 AM |
|
|
Micra rad re-core £?
2 Questions....
1. How much should I expect to pay to get an Aluminium Micra rad re-cored?
2. What's the best way to connect the different diameter outlets of the Micra rad and the Pinto water pump/thermostat?
Cheers
Nick
|
|
|
|
|
Mark Allanson
|
| posted on 5/12/04 at 05:12 PM |
|
|
1, £25 should do it
2, I used Focus 1.4 hoses, they are 34mm at the ends, and 24mm in the middle (which is where I cut them!)
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
nick205
|
| posted on 5/12/04 at 09:02 PM |
|
|
thanks mark, £25 seems reasonable and a good tip with the hoses too!
Cheers
Nick
|
|
|
Mark Allanson
|
| posted on 5/12/04 at 09:13 PM |
|
|
If you need any tips on connecting the pinto to the micra rad, just let me know, mine works like a dream
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
nick205
|
| posted on 6/12/04 at 08:52 AM |
|
|
Thanks again Mark, I'm sure I'll need some more info once I get onto plumbing it in.
Nick
|
|
|
