prawnabie
|
| posted on 20/8/16 at 08:26 PM |
|
|
U/S Bearing markings..
Hi all,
The mains bearings on my 13/60 herald engine say .020 US on them. I assume this means they are to suit a crank reground .020? I am looking at
bearings but they are listed as .020 oversize...
|
|
|
|
|
theconrodkid
|
| posted on 20/8/16 at 08:32 PM |
|
|
yup.crank is ground so journals are undersize
who cares who wins
pass the pork pies
|
|
|
snapper
|
| posted on 21/8/16 at 06:14 AM |
|
|
You need to measure both the crank and the bearing tunnel as both can be bored/ground to a different size
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
prawnabie
|
| posted on 22/8/16 at 10:10 AM |
|
|
Thanks for the replies - here are the markings
|
|
|
