Shooter63
|
| posted on 31/12/17 at 06:13 PM |
|
|
Zetec turbo clutch
A question for you zetec turbo running guys, what clutch did you use as I presume a std one won't take the torque, type 9 gearbox by the way,
steel flywheel.
Shooter
|
|
|
|
|
CosKev3
|
| posted on 31/12/17 at 06:39 PM |
|
|
Focus RS clutch rings a bell,or parts of one mixed with other parts! 
|
|
|
jossey
|
| posted on 31/12/17 at 07:34 PM |
|
|
Yes I have a stage 1 rs focus clutch and running zetec turbo with 269hp now and launch control. Been on for 30 trackdays and about 2000 miles on road.
No issues.
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
|
Shooter63
|
| posted on 1/1/18 at 04:50 PM |
|
|
Cheers lads, mine uses a Burton zetec RWD flywheel so it'll be a pinto uprated clutch that I'll need, I'll get one of the AP jobs I
think.
Shooter
[Edited on 1/1/18 by Shooter63]
|
|
|
Daz1234
|
| posted on 28/1/18 at 09:14 PM |
|
|
Hi guys
I bought this flywheel/clutch combo for my Zetec Turbo (around 235bhp)
Im now worried its not going to be up for the job? I hope it is ...cost enough.
What do you reckon?
Daz
|
|
|
jossey
|
| posted on 28/1/18 at 10:22 PM |
|
|
A link for us.....
I use the stage 1 focus rs clutch on mine with over 300hp and has been fine for 2 years. Stripped recently and still looking good.
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
|
Daz1234
|
| posted on 28/1/18 at 11:01 PM |
|
|
Oops here you go
http://www.kitspares.co.uk/index.php?route=product/product&product_id=1232
It's small dia and less beefy looking than the clutch I had on there (pinto clutch I think) but the springs look thicker.
The old clutch was slipping when you put the power down....
Daz
|
|
|
