Jeffers_S13
|
| posted on 17/1/05 at 10:02 AM |
|
|
Where to buy those aluminium trumpet inlets ?
Anyone know what I mean ? they are on the inlets for GT40's.
How thick are they and what sort of sizes are available ? and how much are they ?
As in this picture :
http://images.google.co.uk/imgres?imgurl=http://www.ahmotorsports.co.uk/photos/8VTSmansml.jpg&imgrefurl=http://www.ahmotorsports.co.uk/home.htm&am
p;h=116&w=128&sz=7&tbnid=S5rM2BKQvkcJ:&tbnh=77&tbnw=84&start=18&prev=/images%3Fq%3Dinlet%2Btrumpets%26hl%3Den%26lr%3D%26sa
%3DG
Cheers
James
[Edited on 17/1/05 by Jeffers_S13]
|
|
|
|
|
Jeffers_S13
|
| posted on 17/1/05 at 10:19 AM |
|
|
Think it might be ram pipes that I need now
|
|
|
JJM
|
| posted on 17/1/05 at 02:38 PM |
|
|
Most decent tuning shops should sell them-Demon Tweeks, Rally Design etc. Make sure you get the correct ones though-Webers slide in, Dellortos are
bolt on-cost around £10-15 each-so 4 needed for twin carb setups obviously.Length is important also.
|
|
|
Jeffers_S13
|
| posted on 17/1/05 at 02:45 PM |
|
|
After a bit more searching, this is exactly what Im hoping to replicate :
http://nicoclub.com/zerothread?id=86596&page=1
The ram pipes are really just to smooth flow into the headers, I need to do a bit of digging to determine dimensions. From other things Ive read, the
volume of the headers should be the same as the cylinder volume and the plenum should be twice the engine capacity as a rule of thumb, bigger is
better than smaller in each case ?
James
|
|
|
Volvorsport
|
| posted on 17/1/05 at 07:51 PM |
|
|
try jenvey dynamics for some carbon fibre ones .
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
|
