BAS
|
| posted on 10/6/22 at 06:52 PM |
|
|
Crossflow Dizzy and Ignition
My crossflow has a 25D lucas dizzy with a Hall effect sensor and what looks like a Lucas amplifier. Unfortunately the trigger wheel is missing (never
had it running). It seems that the rotor arm should have had the trigger moulded to it, and these seem to be unobtainable. The ignition will spark if
I trigger the sensor, so it would have worked at sometime.
The engine is an unknow quantity to me but has lot of trick performance parts, and I assume a hot cam. 1700 dry sump twin 45's good compression
and oil pressure comes up on the starter motor. so worth pursuing.
My question is would the dizzy offered by Burtons work as a direct replacement for my current setup? It seems to have a built in amplifier so the old
Lucas one would be redundant.
https://www.burtonpower.com/x-flow-elec-lucas-distributor-kit-fp299k.html?utm_source=google&utm_medium=prodlistad&utm_campaign=gb_feed?WbRf=Pr
odListAd&gclid=EAIaIQobChMI0ePCh4aj-AIV0IBQBh257AOXEAQYAyABEgLM9vD_BwE
I don't what to go the mappable ignition route for the time being. But any advice would be welcome.
|
|
|
|
|
Mike Wood
|
| posted on 10/6/22 at 07:28 PM |
|
|
Try asking:
The Distributor Doctor for advice, spare parts, rebuilt or new distributor (http://www.distributordoctor.com/new-lucas-distributors.html
http://www.distributordoctor.com/lucas-distributor-electronic-ignition.html & http://www.distributordoctor.com/about.html)
Simon BBC:
https://simonbbc.com/ford-kent-crossflow-45d-based-distributor/
Cheers
Mike
[Edited on 10/6/22 by Mike Wood]
[Edited on 10/6/22 by Mike Wood]
[Edited on 10/6/22 by Mike Wood]
|
|
|
BAS
|
| posted on 10/6/22 at 07:49 PM |
|
|
Cheers, thanks for the links.
Seem I should get away with this.
https://simonbbc.com/Powerspark-Electronic-Ignition-Kit-for-Lucas-25D--DM2-Distributor-K2--R1
So replace the existing sensor and the amp, and just fit this to my existing dizzy?
|
|
|
BAS
|
| posted on 10/6/22 at 08:32 PM |
|
|
Just ordered the Powerspark kit. I'll see how it go's, and report back.
Thanks
|
|
|
