Type 9 Bell Housing

Not logged in [Login - Register]

LocostBuilders » Forum » Engine & Transmission » Type 9 Bell Housing

Garage Equipment at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

davepro

Junior Builder

Posts 41
Registered 11/5/05
Location Watford, Herts
Member Is Offline

Photo Archive Go!

Building: Locost

posted on 9/6/05 at 08:58 PM

Type 9 Bell Housing

Hi All

Can some please advise me whether a Type 9 5 speed - 2.9 v6 bellhousing is the same as a MT75 - 2.9 V6 bellhousing?

Thanks in advance

Dave

Dave Prouten

paulf

Contributor

Posts 3061
Registered 29/3/02
Location Rothwell northants
Member Is Offline

Photo Archive Go!

Building: 2 litre zetec, live axle, throttle bodys and megas

posted on 9/6/05 at 09:16 PM

Both will bolt to the engine the same, but the mt75 is cast integral with the box and cant be removed like the type 9.
Paul.

turbodisplay

Posts 1011
Registered 14/1/05
Member Is Offline

Photo Archive Go!

Building: custom 4x4 2.9 turbo

posted on 9/6/05 at 11:20 PM

I got a type 9 out of a 2.8 v6.

It was all alloy, quite rare i belive as most are cast iron.

Darren

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users

Mr G

Un Verified Member

Posts 1650
Registered 19/10/02
Location 5 Link
Member Is Offline

Photo Archive Go!

Building: Muscle

posted on 10/6/05 at 09:41 AM

All the type 9 v6 4x4 bellhousings are alloy.

As reference you can also swap over the front bellhousing casings on mt75 boxes. example v6 front section bolted onto 2wd rear etc.

Cheers

G

LocostBuilders » Forum » Engine & Transmission » Type 9 Bell Housing

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.